Marketing Link   A.H.Heyl - Sales                            D-65795 Hattersheim                        Phone +49 (0) 6190 -3155                        Fax.+49 (0) 6190 - 72563    

TM-Drain-Tec
A tested special multi-functional protection and drainage system
In accordance with DIN 4095 and DIN 18195

TM-Drain Membranes are an effective protection and drainage system for building projects at locations with high water load. TM-Drain-Membranes consists of a knobbed roll and a solid filter mat.
This 2-layer system protects the damp-proofing course against soil and root movements
 and provides efficient share out of the soil pressure.

TM-Drain-Membranes are suitable for horizontal as well as vertical placing.

TM-Drain-Tec in vertical installation
There TM-Geo-Tec is well-tried for being used together with bituminous thick coatings,
Such as perimeter insulating boards, rigid or flexible sealing grouts. The knobs laid towards the soil guarantee a safe and durable drainage of ground and rain water. The mat on the knobs acts as a filter and avoids siltation of the knob channels

TM-Drain Membranes consists of 8N-Knobs and a very stable filter fleece.
This two-layered system protects the seal against earth and roots movements and provides effective pressure of the earth. TM-Drain Membranes are particularly suited to pressure resilient seals such as perimeter insulation boards, rigid or flexible sealing and avoid silt up of the Membranes Channels. This two-layer system protects the seal against earth and root movements and provides an effective pressure of the earth.

TM Drain Membrane is an effective protection and drainage system for buildings and ground construction projects.
At locations with high water load, particularly against transverse pushing underground-water and increased surface water.
TM Drain Membrane consists of a regularly KNOB MEMBRANE and an added stable filter fleece.
This two-layer system protects the seal against earth and roots movements and provides of an effective pressure of the earth.  TM Drain Membrane can both horizontally and vertically to be relocated.

Horizontal
• unroll PM-Drain-Tec with the fabric showing upwards
• make sure that the rolls have an overlap of approx. 15 cm and lift the fabric accordingly
• it is important that the surfaces to be drained have a minimum inclination of 2%

The soil-facing knobs of the membrane guarantee a safe and permanent drainage
of groundwater or rainwater. This is applied by the membranes fleece acts as a filter
and prevents the knobs channels become silt up.
 

TM-Drain-Tec offers the following advantages

1   Soil
2   Geotextile
3   TM Knob Membrane (Roll)
4   Perimeter insulation
5   e.g. Insulation
6   Brickwork

• Suitable for vertical and horizontal installation
• Multi-functional foundation wall protection
• High drainage efficiency and optimum water discharge through the knobbed rolls
• The polypropylene filter fabric avoids siltation of the knobs
• The drainage capacity of 4.6 l (sum) exceeds by far the requirements of DIN 4095
• Highly efficient and durable filter function of the fabric thanks to optimal pore distribution
• placing independent from atmospheric conditions; can also be processed at sub-zero temperature
• Quick and easy installation; work can be carried out upright
• Age-resistant by special stabilizers
• Environmentally sound: the material can be completely recycled and has no toxic effects
  on the water table
• Protective action meeting DIN 18195
• Scientifically tested

Instructions for installation

Vertical

• Sealing heights of max. 1.9 m the 2 m the Knob Membrane become on the wall unrolled • with sealing heights over 1,9 m those become Courses cut and full length of moves downward above • fasten the courses with the TM-Mounting-Steel-Nails.

• Must pay attention to the lateral overlap (about 15 cm) of individual lanes and the fleece   corresponding increase

• The upper edge of the courses must itself always approximately 15 cm above the sealing • find the concluding course becomes at the end with at least 30 cm broad with the initial course • overlaps the lower end rests upon the ring drainage


Horizontal

• TM-drain-Tec unroll, the fleece shows thereby upward
• on overlaps (about 15 cm) of the particulars  courses, respect the fleece
accordingly is increased
• It is important that the draining Faces a gradient of at least 2% have

… the Solution

TERRA–MEMBRANE

Interested?